|Place of Origin:||Sichuan, China|
|Certification:||ISO9001-2008, CE,BV,SGS,Factory test|
|Minimum Order Quantity:||1 - 499 Pieces|
|Delivery Time:||40GP during 3~4 weeks or as required|
|Payment Terms:||L/C,T/T, Western Union|
|Supply Ability:||100000 Ton/Tons per Year|
|Product Name:||PN16 SDR11 PE100 Electrofusion HDPE Fittings Reducer For Water Supply||Application:||Gas,Water,Oil Etc|
|Standard:||EN 12201-3:2011,EN 1555-3:2010||Material:||PE100 Virgin Raw Material|
|Specification:||25*20mm~400*315mm PE100 PN16 SDR11||Port:||China Main Port|
PN16 SDR11 PE100 Electrofusion HDPE Fittings Reducer for Water supply
Production Description of Electrofusion HDPE Reducer
-Electrofusion HDPE fittings are welded by electrofusion machine to connect HDPE pipes together: After
electrofusion welding machine plug in electricity and turn on, The copper wire buried inserted in electric fuse
HDPE fittings are heated and make HDPE melt, Which joint HDPE pipe and fittings well.
Adavantages of CHUANGRONG Electrofusion HDPE Fittings
Highest cost performance
Compared with traditional steel pipes, it is light and easy for workers to install and repair
Low installation and maintenance costs
Easy loading and transportation
Suitable for non-excavation
CHUANGRONG HDPE pipeline system integrates its environmental responsibility into its daily business activities.
HDPE is a green environmental protection material, which can be recycled without causing pollution to the environ
We work hard to conserve natural resources and constantly strive to optimize the environmental performance of our
products and how they
1) Accept customer OEM production, large quantity customization requirements.
2) Technical support:Professional engineers and senior, special engineers provide technical support:More than 80
Technique personnel,20 Middle class engineer,8 Senior Engineers.
3)More than 100 sets injection molding machine and the largest (300,000g)domestic injection molding machine;
Over 20 units of automation robot, 8 sets automation Electrofusion fittings production system.
4)Various type(Elbow,Coupler,Tee,End Cap,Saddle,Ball Valve etc) and completed specification(Ranged from
20-630 Electrofusion type)
5)Annual production capacity up to 13000 tons(More than 10 million pieces or more)
The key factors of product quality are technical support and material selection
Installed successfully. Our strong and efficient teamwork provides customers with the best solution in a timely manner:
The sales team understands and understands the customer's use and proposes suitable HDPE pipeline solutions and
products. The production department coordinates the production plan to ensure the fastest delivery time. Engineers
and technicians solve and provide technical product performance and technical support.
Production workshop & Equippments
Own over 100 sets of injection molding machine;
The largest(300,000g) domestic injection molding machine;
Over 20 units hautomation robot;
8 sets automation Electrofusion HDPE fittings production system.
Annual capacity of over 13000 tons which gives customers huge inventory support.
P2:4.7 Pin(4.0 welded by Switched adaptor) P3:Printed Parameters P4:Embedded copper wire
1)Fusion Pin of Electrofusion HDPE fittings
4.7mm Pin of Electrofusion HDPE fittings produced.
Besides switched adaptors for 4.0 Pin supplied to suit claw of 4.0 electrofusion machine.
2)Moulded-in welding parameters
Welding parameters as per EN1555 is printed on the fittings, Such as Products' name,OD(mm),PE100,
Bar code is also attached on the electrofusion fittings for scanning.
To promote joint quality,all elements are coated with polyethylene before being moulded into the fitting body.
All fittings have removable pipe stops.The stops ensure pipes cannot be inserted past the midpoint,but can
be removed for use in,for example,repair situations.
4)High quality copper wire embed in the HDPE fittings which have Good thermal conductivity.
Details of Electrofusion HDPE Reducer
Electrofusion HDPE Reducer
As below specification sheet in detail
SINOPEC, BASELL, SABIC, BOROUGE etc
EN 12201-3:2011,EN 1555-3:2010
Black color , blue color, Orange or as request.
Normal export packing. by carton
Production Lead Time
Depending on the order quantity.
ISO, CE,BV,Factory Test Report
T/T, L/C at sight
EXW, FOB, CFR, CIF,DDU
Specification of Electrofusion HDPE Reducer
Applications of Electrofusion HDPE Fittings
1.Municipal water supply, gas supply and agriculture etc.
2.Commercial & Residential water supply
3.Industrial liquids transportation
5. Food and chemical industry
7. Replacement of cement pipes and steel pipes
8. Argillaceous silt, mud transportation
9. Garden green pipe networks
We can supply ISO9001-2008, BV ,SGS, CE etc certification.
All kinds of products are regularly conducted pressure-tight blasting test,longitudinal shrinkage rate test,
quick stress crack resistance test, tensile test and melt index test, so as to ensure the quality of products
totally reach the relevant standards from raw materials to finished products.